5000 Litre Ultra Slim Modline Aquaplate Steel Water Tank (Kingspan) - 800mm x 3200mm x 2020mm

Kingspan's 5000 Litre "Ultra Slim" Modline AQUAPLATE Steel Water Tank with modern flat ends is a popular size for new homes. This thin tank (800mm wide) can fit in narrow areas like the side of your house. Ideal for outdoor use, in gardens, pool top-ups and plumbing into toilets and laundry.

Original price was: $3,475.00.Current price is: $3,127.00. GST incl.

Customer Care Guarantee
Actual Capacity 5,000 litres
Width 800 mm
Length 3,200 mm
Height 2,020 mm
Weight 130 kg
Availability SE QLD, NSW/ACT, VIC

Kingspan's Current ETAs*

  • QLD–Nth NSW: Slimline/Modline/Square & Small Round Tank (under 5000L) 2-3 weeks; Large Round Tanks (over 5000L) 3-4 weeks
  • NSW/ACT: 4-5 weeks
  • VICTORIA: Slimline/Modline/Square & Small Round Tank (under 5000L) 4 weeks; Large Round Tanks (over 5000L) - fully booked for 2024. Next delivery mid-January 2025.

* Estimates updated 18 November 2024. May vary based upon holidays, location, distance, tank size and shape. Dates are normally confirmed within a week after payment. Your tank order can be cancelled prior to production if unacceptable.

Steel tanks are delivered throughout Queensland, New South Wales and Victoria within 450km from a Kingspan manufacturing facilities.

Kingspan's Delivery Fees

  • Metro Zone: 0-120km from factory, including pickup - $294†
  • Zone 3: 121-180km from factory - $359
  • Zone 4: 181-240km from factory - $419
  • Zone 5: 241-300km from factory - $469
  • Zone 6: 301-450km from factory - $744
* Distances are approximations, enter postcode for precise quote. Price is per tank. † Kingspan considers pickups the same as Metro as handling and loading is still required for each tank. Tanks are fill tested for leaks prior to leaving factory and all duty of care is with you as the end customer for pickups. Any damage occurred during transit will void tank warranty. Tank delivery is strongly encouraged when possible, as Kingspan sends out a team who will absorb all the risk when carrying your tank to its pad (access permitting). ‡ Tank Shop only guarantees supply and delivery of tanks as specified to the delivery address. Any onsite installation and craning of any kind must be organised by the customer. While attempts are made to position tanks to the prepared pad, Tank Shop does not guarantee siting. Such is at the discretion of the delivery team on the day to decide whether it is safe and possible.

  • Up to 23 Modern COLORBOND® Colours to choose from
  • Made from BlueScope AQUAPLATE® Steel, designed for water storage
  • Inner Stainless Steel Support Frame, prevents bowing and bulging
  • Lined Food-Grade Polymer (AS2070) and Safe for Drinking (AS4020)
  • Industry-Leading Warranty - 20 Year Corrosion, 10 Year Construction
  • Designed and manufactured in Australia
  • Approximately $100 Worth of Accessories Included!

Approximately $100 Worth of Accessories Included!

    • 25mm Fitted Outlet
    • 25mm WaterMarked Ball Valve
    • 100mm Overflow
    • "Mozzie Stoppa" Screen (QLD only)
    • 400mm Inlet Strainer
    • 400mm Light Guard
  • *Location

    Select Kingspan facility closest to your tank delivery address. Unsure? Click "Delivery Quote" tab above to find out.

    *Tank Colour

    Base colours are tightly bonded to the steel sheets as part of the steel fabrication process. We recommend choosing a base (genuine Colorbond steel) colour as they are more durable than painted colours. Painted colours offer a greater selection of colours, but also carry an additional cost to paint them on.

    • Painted Colour:

    *Tank Colour

    Base colours are tightly bonded to the steel sheets as part of the steel fabrication process. We recommend choosing a base (genuine Colorbond steel) colour as they are more durable than painted colours. Painted colours offer a greater selection of colours, but also carry an additional cost to paint them on.

    • Painted Colour:

    *Tank Colour

    Base colours are tightly bonded to the steel sheets as part of the steel fabrication process. We recommend choosing a base (genuine Colorbond steel) colour as they are more durable than painted colours. Painted colours offer a greater selection of colours, but also carry an additional cost to paint them on.

    • Painted Colour:
    ⓘ Colour Tip: Base colours are tightly bonded to the steel sheets as part of the steel fabrication process. We recommend choosing a base (genuine Colorbond steel) colour as they are more durable than painted colours. Painted colours offer a greater selection of colours, but also carry an additional cost to paint them on.

    View Tank Colour Chart for your state: QLD Colours | NSW Colours | VIC Colours
  • Add Pump?

    Save by bundling a pump with your tank. Select a pump for more information on that pump.

    • Retails for with tank

    ✔ REEFE RPS036F (100L/min Flow Rate, 36m Head Pressure, 4-6 outlets) is a submersible pressure pump with float valve. Recommended for single story buildings and granny flats where plumbing into few outlets are required. It has an integrated pressure controller for easier installation and seamless operation with rainwater tanks. (view more info)

    Tank Shop includes a bonus pump cover kit (RRP $54) that allows you to effectively manage the flow pipe and power cord out the top of your tank.

    ✔ REEFE RM5000-3 (RPS036F w/ RMV3550) (100L/min Flow Rate, 36m Head Pressure, 4-6 outlets) is a submersible rain mains system that includes a pressure pump with float valve. Recommended for single story buildings and granny flats where plumbing into few outlets are required. It has an integrated pressure controller for easier installation and seamless operation with rainwater tanks, comes with dry-run protection and 10 metre power cable.

    Tank Shop includes a bonus pump cover kit (RRP $54) that allows you to effectively manage the flow pipe and power cord out the top of your tank.
    ✔ REEFE RPS34E Delivered + BONUS Cover Kit (80L/min Flow Rate, 32m Head Pressure, 4-6 outlets) is a submersible pressure pump with float is a domestic pump recommended for pumping water from tanks to gardens and household use. It has an integrated pressure controller for easier installation and seamless operation with rainwater tanks. 100% European made for exceptional quality and performance, this pump is compact, lightweight and robust for extended service life across various applications. (view more info)
    Tank Shop includes a bonus pump cover kit (RRP $54) that allows you to effectively manage the flow pipe and power cord out the top of your tank.
    ✔ REEFE RPS57E Delivered + BONUS Cover Kit (90L/min Flow Rate, 57m Head Pressure, 6-9 outlets) is a submersible pressure pump with float is a domestic pump recommended for pumping water from tanks to gardens and household use. It has an integrated pressure controller for easier installation and seamless operation with rainwater tanks. 100% European made for exceptional quality and performance, this pump is compact, lightweight and robust for extended service life across various applications. (view more info)
    Tank Shop includes a bonus pump cover kit (RRP $54) that allows you to effectively manage the flow pipe and power cord out the top of your tank.
    ✔ CLAYTECH CX + BONUS Cover Kit (100L/min Flow Rate, 48m Head Pressure, up to 8 outlets) is a submersible pressure pump exclusive to Kingspan for pumping water from tanks to gardens and household use. It has an integrated iSENSOR pressure controller for easier installation and seamless operation with rainwater tanks. Includes a slotted strainer designed to prevent single cell algae growth and is less prone to blockages. (view more info)
    Tank Shop includes a bonus pump cover kit (RRP $54) that allows you to effectively manage the flow pipe and power cord out the top of your tank.
    ✔ GRUNDFOS SBA3-45A + BONUS Cover Kit is a submersible (in tank) pump recommended for pressuring water from tanks to the entire house. It is recommended for approximately 7 taps with a maximum flow rate of 100L/min.
    Tank Shop includes a bonus pump cover kit (RRP $54) that allows you to effectively manage the flow pipe and power cord out the top of your tank.

    ✔ GRUNDFOS SBA3-45A + RAIN-TO-MAINS + COVER KIT provides you with fully automatic rainwater/mains water changeover for supplying water to toilets and laundry. This pump can handle pressuring water to two-story homes and comes with a two year warranty. It is delivered with a rain-to-mains valve (20mm AcquaSaver) separate to your tank.

    Tank Shop includes bonus installation of a pump cover kit (RRP $54) that allows you to effectively manage the flow pipe and power cord out the top of your tank, however your plumber will still need to install the submersible pump.

    Note: We highly recommend choosing Kingspan's Evolution System, which is slightly more expensive, but includes double the warranty + Kingspan will install the system in your tank onsite after delivering it to the pad (minimising your plumbing time and/or expense).
    ✔ KINGSPAN EVOLUTION System is a high-quality system backed by a long 5 year warranty. It combines a powerful ClayTech submersible pump (~100L/min), pressure management, and an Acquasaver rainwater-to-mains valve below a tidy enclosed casing that sits on top of your tank. The system automatically switches to your mains water supply when your rainwater runs out or during a power out. It also includes a double non-return valve as required by councils/water authorities. Best of all Kingspan install them in your tank after delivery so all your plumber needs to do is connect the pipework which can save you on install costs.
    Warning: Sorry, you've selected an invalid pump option. Please select a specific pump or "No Pump" if not required. If you would like a pump, but are unsure which one, select "Yes, please recommend one" and we will follow up with you.

    Pump Cover

    Reefe Pump Cover FeaturesIf your pump will be out in the open weather then it is good to get a pump cover to protect your pump and keep its warranty intact.

    Pump Cover Colour

    REEFE Pump Cover Colours

    Tank-Pump Connection

    Tank-Pump Connection KitTank-Pump Connection Kit allows you to easily connect your tank ball valve to your REEFE pump, which will save you time and expense sourcing the bits and pieces separately. It includes a 500mm Suction Hose, 25mm Male Hose Tail, 25mm Nut & Tail Hose Tail, 25mm Hose Clamps, 25mm Hex Nipple, 25mm Y-Strainer and Thread Tape.

    ✔ REEFE PRJ052 (55L/min Flow Rate, 33m Head Pressure, 2-4 tap outlets) is an external jet pump recommended for outdoor use and pumping water from tanks to gardens. (view more info)
    ✔ REEFE PRM100E (95L/min Flow Rate, 38m Head Pressure, 7-12 outlets) is an external multistage pump constructed with the best quality materials giving class-leading efficiency and reliability, with quiet, consistent and vibration free operation. Ideal for domestic and commercial applications. It has the benefit of a power-saving design that uses up to 30% less power than similar brands. (view more info)
    ✔ REEFE PRM135E (100L/min Flow Rate, 50m Head Pressure, 9-15 outlets) had better head pressure than the PRM100E that allows it to cover longer distances for a little bit extra. It is an external multistage pump constructed with the best quality materials giving class-leading efficiency and reliability, with quiet, consistent and vibration free operation. Ideal for domestic and commercial applications. It has the benefit of a power-saving design that uses up to 30% less power than similar brands. (view more info)
    ✔ POLY PUMP COVER & BASE has been added to your order in your selected colour. It will be couriered with your selected pump in your chosen colour.
    ✔ Tank-Pump Connection Kit allows you to easily connect your tank ball valve to your REEFE pump, which will save you time and expense sourcing additional bits and pieces. It includes a 500mm Suction Hose, 25mm Male Hose Tail, 25mm Nut & Tail Hose Tail, 25mm Hose Clamps, 25mm Hex Nipple, 25mm Y-Strainer and Thread Tape.
    Pump Delivery Note: To provide you with the best price, your REEFE pump will be couriered separately to your tank (delivery included in quoted price).

    Add Fire Fitting

    If your tank water will be used for fire fighting purposes, select the state appropriate fire kit. Fire kits comply with most council and shire requirements for areas in chosen state where water tanks are used for fire protection.

    • Fire Kit:
    ✔ QLD Fire Kit includes installation of 50mm outlet, 50mm ball valve, camlock adaptor and dust cap to comply with council and shire requirements for areas needing water tanks for fire protection.
    ✔ NSW Fire Kit includes installation of 50mm outlet, 50mm ball valve, 65mm Storz adaptor and dust cap to comply with most council and shire requirements for areas in NSW needing water tanks for fire protection.
    ✔ VIC Fire Kit includes installation of 65mm outlet, 65mm ball valve, 64mm CFA adaptor and dust cap to comply with most council and shire requirements for areas in Victoria needing water tanks for fire protection.

    Add High-Flow

    Select to have Kingspan's optional High-Flow system installed. This system provides a 100mm inlet at the side of your tank (which is good if you can't run downpipes into the top of your tank due to height restrictions), and can handle flow rates up to 600l/min while filtering your rainwater. An inlet strainer that can handle high flow-rates will be included in any case. Only add if you know what it is, otherwise you don't need it.

    • High-Flow Filter:
    ✔ Kingspan High-Flow Filter will be installed inside your tank at your desired position (exteral parts provided loosely). It includes a 100mm Inflow and 100mm Overflow on the same side of tank, making it ideal for wet systems (where pipework comes up out of the ground next to your tank). This system can handle flow rates up of 600l/min while providing you with better rainwater filtering. Kingspan's High-Flow Filter may not suit every situation. Please allow 800mm space on the side High-Flow will be installed. NOTE: 400mm Inlet is still required as a maintenance hole, but a cover can be included (select "High-Flow System w/ 400mm Inlet Cover").
    ✔ Kingspan High-Flow Filter w/ Inlet Cover. The High-Flow will be installed inside your tank at your desired position (exteral parts provided loosely). It includes a 100mm Inflow and 100mm Overflow on the same side of tank, making it ideal for wet systems (where pipework comes up out of the ground next to your tank). This system can handle flow rates up of 600l/min while providing you with better rainwater filtering. Kingspan's High-Flow Filter may not suit every situation. Please allow 800mm space on the side High-Flow will be installed. NOTE: 400mm Inlet is still required as a maintenance hole, however a 400mm cover will be included with this option selected.
  • Tank Fitout (if known)

    Note: Included in each tank build is 1x 25mm outlet (base of tank), 1x 25mm ball valve, 1x 400mm inlet strainer + UV light guard (on top of tank), 1x 100mm moulded overflow.

    Ball Valve Position

    25mm Ball Valve Outlet is located at the very bottom wall of your tank and is where you will access water from your tank and/or connect to external pump. Note: A 25mm outlet is required on all tanks for manufacturing and testing purposes.

    IMPORTANT: The included 25mm Outlet with Ball Valve is highly recommended on every tank as this is the only size outlet that can sit at the lowest point (first corrugation high on tank wall) allowing water to be fully drained should such ever be required. 

    Inlet Strainer Position

    400mm Inlet Strainer is located on top of your tank and is often best positioned closest to the downpipes from the gutter. It is a mandatory requirement as it doubles as a maintenance hole for inspecting and accessing inside your tank.

    Overflow Position

    100mm Overflow is located at high up on the wall of your tank and best positioned closest to the stormwater drainage point. Note: 100mm is the standard overflow size. If you need 90mm, then we recommend a 100mm to 90mm reducer when procuring your pipework.

    IMPORTANT: Overflow is highly recommended on every tank to avoid water overflowing at inlet strainer. Only select "Not Required" if absolutely sure.

    Highflow Position

    Kingspan's Highflow has a 100mm inflow (higher) and 100mm overflow (lower) located on the wall of your tank, which is normally best positioned closest to your rainwater charge line and stormwater drainage. NOTE: Please ensure your inlet isn't positions at the same side as your high-flow (as it will clash when installing).

    Fire Outlet Position

    Fire outlet is located at the bottom wall on the side of your tank that is easily accessible by firefighters.

    Evolution Pump Position

    Evolution Pump System is located at the top of your tank and can be positions in any 1-12 location. Recommended a location nearest to plumbing on the wall next to your tank. Note: Can't be had at same location as your inlet strainer.Evolution Pump System is located at the top of your tank and is normally placed at either E or F (~600mm in from end of tank). You can also place it at A, B or C if that works better for you. Choose a location nearest to plumbing on the wall next to your tank. Note: Can't be had at same location as your inlet strainer. Evolution Pump System is located at the top of your tank and can be installed at Position A, B, C, D, E, F, G or H. Recommend choosing a location nearest to plumbing on the wall next to your tank. Note: Can't be had at same location as your inlet strainer.

    Pump Cover Kit Position

    Submersible Pump Cover is located at the top of your tank and can be positions in any 1-12 location. Recommended a location nearest to plumbing on the wall next to your tank. Note: Can't be had at same location as your inlet strainer.Submersible Pump Cover is located at the top of your tank and is normally placed at either E or F (~600mm in from end of tank). You can also place it at A, B or C if that works better for you. Choose a location nearest to plumbing on the wall next to your tank. Note: Can't be had at same location as your inlet strainer. Submersible Pump Cover is located at the top of your tank and can be installed at Position A, B, C, D, E, F, G or H. Recommend choosing a location nearest to plumbing on the wall next to your tank. Note: Can't be had at same location as your inlet strainer.

    Additional Fittings?

    Do you need additional tank fittings other than the included 25mm outlet and ball valve (base of tank), 400mm inlet strainer (on top of your tank) and the 100mm overflow (top-level)?

    Select Additional Outlets/Fittings


    Additional Fittings Positions

    Other Tank Requirements (if any)

    Note: If you need more than one tank, then we recommend adding each tank to your cart separately rather than increasing the quantity below. Otherwise any pump, inclusions and fitting positions selected above will be the same. Tank Shop will follow up with diagrams to double-ensure your tank order is correct in any case.
SKU: ML-0800-3200-2020| Availability: 
Made to Order All water tanks are made to order according to your specific requirements.
Categories: , , Tag: Brand:
† Every care is taken to ensure that the information on this website is accurate at the time of publishing. Unfortunately, errors can occur, and information may also change over time. As such, before acting on any information found on this website please either first confirm it with us in writing or use at your own risk.